Commodity ID : 00245936 / Concluding Modified : 22/09/2020

How to wall mountain your TV (X80H, X90H, X91H, X95H series of 55, 65 inches)


This page is a guide for using the compatible Wall Mountain Unit (SU-WL450) to mount the X80H, X90H, X91H and X95H series (55 inch and 65 inch) on a wall.

Of import:
For product protection and safety reasons, Sony recommends that the mounting of your Idiot box on the wall is performed past Sony dealers or licensed contractors.

  1. Precautions

    • For more detailed information and precautions about wall mounting, see the Wall-Mount Subclass Operating Instructions and the Installation Information (Wall-Mountain Subclass) on the product page of your TV.
    • The wall should be capable of supporting a weight of at least 4 times the TV weight. Regarding the TV weight, refer to Wall mounting compatible information.
      Sufficiently reinforce the wall to which the TV will be mounted if it is not strong plenty.
    • Be sure to apply the supplied screws and attachment parts properly. If y'all use substitute items, the Idiot box may fall and cause bodily injury to someone or damage to the Television.

  2. Preparing the required parts and tools

    Confirm that you take all of the parts.

    • Accessories for the Wall Mountain Unit of measurement (SU-WL450)
      Merely the parts below will be used. The other parts will not be used, so store them with the Operating Instructions in a safe place.

    • Accessories for the Telly
      The Wall-Mount Attachment "VS" will be used.

      NOTE:
      The Wall-Mount Attachment "VS" is included with the TV. Please note that information technology is not included with the Wall Mount Unit of measurement.

    • Other things to prepare
      Prepare the types of tools and screws beneath based on the material of the wall to which the Television receiver volition be mounted.

  3. Mounting the Wall Mount Unit of measurement to a wall

    1. Deciding on the mount position of the TV

      1. Determine on the approximate "top" at which the Television will be mounted.
        Take into account the environment where you will watch Idiot box (such as the sofa) when deciding the mount position such as "peak".

      2. Make up one's mind on the mount position of the Television.
        Check whether there is enough space (width, height, depth) on the wall to mountain the TV.
        The clearance dimensions in the figure beneath are required to prevent heat from accumulating around the TV.

        NOTE:
        If the Boob tube is mounted without surrounding clearance, the vents will become blocked and estrus will accumulate inside, which may cause a fire or damage.

        Figure of dimensions for the space needed to mount the TV. The space needed around the TV is 300mm above, 100mm at each side, and 100mm below.
        Unit: millimeter

      3. Decide on the mountain position of the base of operations of the Wall Mount Unit.
        Make up one's mind on the center position [1] of the TV screen.
        The position at a length of c(figure below) higher up the center position is the position of the spiral holes at which the base will be attached.
        The length from the screw positions to the bottom edge of the TV is length d.

        For the dimensions indicated past letters in the figure, refer to the table below. (The figure is from KD-65X8000H)

        The left figure is the dimensions of the back of the TV (a: TV width, b: TV height, c: length from the center of the screen to the position of the screw holes at which the base will be attached). The right figure is a side view of the TV. (d: length from the bottom edge of the TV to the screw hole positions)
        Unit: millimeter

        [1]Center position of the screen when the Idiot box is attached

        Model (KD-/KE-) aTV width bTelevision set height cLength from the middle of the screen dLength from the bottom edge of the TV
        65X95xxH i,448mm 833mm 71mm 492mm
        55X95xxH 1,229mm 710mm 133mm 492mm
        65X90xxH ane,450mm 833mm 71mm 491mm
        55X90xxH 1,231mm 710mm 133mm 491mm
        65X80xxH i,462mm 841mm 71mm 494mm
        55X80xxH 1,243mm 718mm 133mm 494mm
    2. Choosing the wall mounting style.

      Choose between two installation methods: Standard, which creates space betwixt the wall and the Television, or Slim, which brings the TV closer to the wall. With Slim mount, the TV feels integrated into the wall, allowing for a more than streamlined appearance.
      The installation process differs depending on the mounting style.

      NOTE:
      If you choose the Slim mount, utilize of the inputs on the back may be limited.

      For the dimensions indicated by letters in the figure, refer to the table below. (The figure is from KD-65X8000H)

      Standard mount Slim mount
      Figure of the side of the TV (e: Depth when wall mounted with standard mount) Figure of the side of the TV (f: Depth when wall mounted with slim mount)

      Unit: millimeter

      Model (KD-/KE-) eDepth when wall mounted (for standard mount) fDepth when wall mounted (for slim mount)
      65X95xxH 134mm 92mm
      55X95xxH 134mm 92mm
      65X90xxH 134mm 92mm
      55X90xxH 134mm 92mm
      65X80xxH 135mm 93mm
      55X80xxH 131mm 93mm
    3. Mounting the base to the wall

      1. For Standard mount, attach the base adapter to the base of operations.
        Ostend the "b" positions in the figure beneath for the attachment positions.
        * For Slim mount, attaching the base of operations adapter is not required.
        Image of hook location a, b, c, d on the base
        Image of the positions on the base where the base adapters will be attached (b: attachment positions of the base adapters)


        Use the screws (PSW four×ten) included with the Wall Mountain Unit to adhere the base adapter to the base.

        [A]
        Base
        [I]
        Base Adaptor
        [J]
        PSW 4×10

        Image of where A, I, and J will be attached

      2. Place the base of operations on the wall and marshal it with the screw hole positions set in "1-three Make up one's mind on the mount position of the base of operations of the Wall Mount Unit." above, employ a level so that the base is horizontal, and marker the mountain position (iv spiral holes).

        For the screw hole positions, refer to the figure below.
        Image indicating the screw hole positions where the base will be mounted on the wall

        • Standard mount
          Image marking the four places (top and bottom at both ends) where the base will be mounted

        • Slim mount
          Image marking the four places (top and bottom at both ends) where the base will be mounted

      3. Brand holes at the marked points.

      4. Utilize at least iv screws with diameters equivalent to 8mm (prepared separately) to mountain the base of operations to the wall.
        Use a level to mount the base horizontally.

  4. Attaching parts to the Television receiver

    Brand sure to attach the Table-Top Stand before proceeding and installing the TV to the wall by referring to the Setup Guide.
    1. Remove the screws on the back of the Boob tube.

      Remove four screws from the back of the TV.
      * Store the removed screws with the Operating Instructions in a safe place.
      Image of where the screws on the back of the TV will be removed

    2. Adhere the Wall-Mount Attachment (supplied with the Boob tube) to the rear of the TV (to go far parallel with the wall).

      Image of where the Wall-Mount Attachment

      1. Attach the caster and screws (+PSW six×twenty). Tighten the screws firmly so that they are non loose.

      2. Attach the belt and spacer with screws (Standard mount: +PSW six×fifty, Slim mount: +PSW 6×twenty).

    3. Connect the necessary cables to the Television set.

      Connect the power string, antenna cable, and HDMI cables before mounting the TV on the wall. In one case you mountain the Television receiver on the wall, you volition not be able to connect the cables. Make certain to connect them before mounting the Goggle box on the wall.

      NOTE:
      If y'all choose the Slim mount, use of the inputs on the back may be limited.

    4. Detach the Table-Top Stand from the Television.

      Remove ane side of the Table-Acme Stand up at a time. Firmly agree the Table-Top Stand up deeply with both hands while the other people lift up the Idiot box.
      Echo the previous step and remove the other side of the Table-Tiptop Stand up.
      The figure is from KD-65X9500H.

      Image of detaching the Table-Top Stand from the TV

      NOTES:

      • Three or more people are required to detach the Tabular array-Meridian Stand.
      • Be conscientious not to employ excessive force while detaching the Tabular array-Top Stand from the Tv set as information technology may crusade the Television set to fall resulting in personal injury or concrete damage to the TV.
      • Take intendance when treatment the Table-Summit Stand to prevent damage to the TV.
      • Be careful when lifting the Tv as the Table-Top Stand up is detached, the Table-Top Stand may topple over and crusade personal injury.
      • Take intendance when removing the Table-Top Stand from the TV to prevent information technology from falling over and damaging the surface that the Idiot box is sitting on.

  5. Attaching the TV to the Unit

    Annotation:
    Make certain at least two people agree the TV. When carrying the TV, hold the side and bottom of the bezel. Have care not to take hold of the panel surface with your hands, or press the console surface firmly.
    Image of carrying the panel. if you carry by the panel surface, the screen may crack

    1. Attach the TV to the base adapter (Standard mount) or the base (Slim mountain).

      1. Securely adhere the pulley on the back of the TV while aligning it with the holes of the base adapter or base.

      2. Confirm that the caster properly reaches the ends of the grooves on the base adapter or base of operations.

    2. Foreclose the bottom of the Telly from wobbling.

      Attach the chugalug to the wall and then that information technology is non loose, and secure information technology in place using a screw with a diameter equivalent to 5mm (prepared separately).
      * Gently pull the lesser of the display forrard and ostend that the lower side does not ascent forward.
      If it does, secure information technology in place again while making certain the belt is not loose.

      Standard mount Slim mount
      [F]
      Belt
      Figure of the side of the TV (F: secure belt in place with a screw)
      [F]
      Chugalug
      Figure of the side of the TV (F: secure belt in place with a screw)

      If the TV is confirmed to be firmly secured on the wall, mounting is consummate.
      Bask your BRAVIA Television receiver with a wall mounting style that blends in beautifully with your wall.

Related Manufactures